Fiberglass Tractor hood/FRP Tractor parts/Fiberglass engine shell
Heavy truck bumper, air deflector; fender board, toolbox, Racing
chair, Electric minibus body parts, etc.
Agricultural machinery parts:
Tractor bonnet, harvester hood and all kinds of farm machinery body
Process of fiberglass tractor hood/fiberglass tractor canopy/frp
tractor parts/tractor engine shell:
Polish: Mould must be polished before production which will
guarantee the good and solidified surface
Clean: Special detergent are used to get the dust away from the
mould which will make no dark markings in the
gel coat surface.
Release agent: This will be brushed on the mould to make ejection
2nd Fiberglass and resin:
Gel coat: The color of products is decided by the gel coat,with
thickness of about 0.3-0.5mm. UV resistant can
Surface mat: This is to avoid the air bubble on the surface, and
also make fiberglass mat invisible from the finished
Fiberglass mat: Normally we use 300g/m2 (0.6mm thickness) and
450g/m2 (0.9mm thickness). According to your
requests on the thickness and strength, we will calculate how many
layers of fiberglass mat should be used.
Solidify: The time required for solidifying depends on thickness
and weather condition.Normally 24 hours for one
piece to solidify to avoid any deformation after demoulding.
Demould: After solidified, the product will be demoulded
Cut and trim: We will mark the trim line and hole positions on the
mould,then trim according to the marks to
gaurantee the mounting dimensions
4th Adhesion: Professional mould and Temperature and worker
5th Surface treatment :
7th Package Solution:
Our principle: Safe and economical
We choose economical packaging on condition that there will be no
damage during transportation.Shipping: We are very glad to get the
freight cost information for you
as we have long term cooperated forwarder company.
Characteristics of fiberglass tractor hood/fiberglass tractor
canopy/frp tractor parts/tractor engine shell
1, General effect: integral molding as uni-body, top grade and
beautiful appearance, fluency modeling, seamless, water leakage
2, High strength: FRP products have higher strength than ordinary
steel parts. With good impact resistance and high safety guaranty,
FRP products can be repaired conveniently under low cost after
3, Light weight: the deadweight of FRP products is more than 40%
less than that of the steel products even if they have the same
size, thus reducing the fuel consumption, increasing the carrying
capacity and lower the cost at the same time.
4, Clean and environmental protection: no rust, anti-aging (weather
resistance, 10~15 years), temperature difference applies to
5, FRP products has the advantages of flexible design, low
comprehensive cost, large size can be integrated manufactured, and
can be embedded with a plurality of hardware parts to be assembled.
We, Qingdao Lanmon Industrial co.,ltd.with more than 10 years’
experience in producing and exporting fiberglass composite
products, with hand lay up;RTM;SMC process,make us a standard
procedure for quality control and problem prevention. More than 90
percent workers have been working in our factory for over 10 years.
We manufactures numerous molded fiberglass parts that are used
throughout many of the nation’s most-recognized OEMs of rail
transport and bus companies such as CSR,CNR,Geely and so on.
1) 10 years’ experience in fiber glass product trading, have good
knowledge on process, quality control,request on different
products,ready to offer international service for you.
2) Complete production line from fiberglass sheet to mould and
finished products,which keeps a better quality control and will
also save cost for you.
3)30km away from Qingdao Port, which will shorten the delivery time
and save freight cost for you.